# Add a “Receive” button to the token detail page, and make it clear that the copyable address at the top is the contract address

**URL:** <https://community.metamask.com/t/add-a-receive-button-to-the-token-detail-page-and-make-it-clear-that-the-copyable-address-at-the-top-is-the-contract-address/31969>\
**Category:** Feature Requests\
**Created:** [November 15, 2026, 9:16pm UTC](https://community.metamask.com/t/add-a-receive-button-to-the-token-detail-page-and-make-it-clear-that-the-copyable-address-at-the-top-is-the-contract-address/31969 "2026-11-15T21:16:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![bvccpa01](https://dub1.discourse-cdn.com/metamask/user_avatar/community.metamask.com/bvccpa01/32/40116_2.png) [@bvccpa01](https://community.metamask.com/u/bvccpa01)\
**Post date:** [November 15, 2026, 9:16pm UTC](https://community.metamask.com/t/add-a-receive-button-to-the-token-detail-page-and-make-it-clear-that-the-copyable-address-at-the-top-is-the-contract-address/31969/1 "2026-11-15T21:16:18Z")

</div>

When I open a token from the Tokens list (for example USDT on Ethereum), the token detail page shows **Buy** , **Send** and **Swap** , but no **Receive**. The only address you can copy on that page is the token’s **contract address** (`0xdAC17...31ec7`), shown at the top under the token name. A new user who wants to receive that token could copy this address and send it to someone as their deposit address. That would likely mean lost funds.

**Steps to reproduce**

1. Open the MetaMask extension.
2. On the home screen, click a token in the Tokens list (e.g. Tether USD).
3. On the token page, look for a way to receive the token or copy your own address.

**Current behavior**

- There’s no Receive button among the action buttons (Buy / Send / Swap).
- The address next to the copy icon at the top is the token’s contract address, not the user’s account address. Nothing says so.
- You can’t copy your own wallet address from this page.

**Why this matters**

- A user who wants to receive a specific token will naturally open that token’s page and look for a way to receive it there.
- The contract address appears in the same spot and format where a wallet address usually goes, so it’s easy to copy by mistake.
- Funds sent to a token’s contract address are usually unrecoverable. This is a well-known way beginners lose money.

**Proposed solution**

1. Add a **Receive** button next to Buy / Send / Swap. It should open the same Receive flow as on the home screen: your account address, a QR code, and the network shown clearly.
2. Label the address at the top clearly, e.g. **“Token contract: 0xdAC17…31ec7”**. It could also move into the “Token details” section instead of sitting next to the token name.
3. Optionally, show a warning when the user copies a contract address, e.g. _“This is the token’s contract address. Don’t send funds to it. To receive tokens, use your account address.”_

**Expected result**  
Users can safely receive a token straight from its detail page, and nobody confuses the token contract address with their own deposit address.

---

<div class="post-metadata">

**Author:** ![Oxsoltani](https://dub1.discourse-cdn.com/metamask/user_avatar/community.metamask.com/oxsoltani/32/37719_2.png) [@Oxsoltani](https://community.metamask.com/u/Oxsoltani)\
**Post date:** [November 15, 2026, 9:59pm UTC](https://community.metamask.com/t/add-a-receive-button-to-the-token-detail-page-and-make-it-clear-that-the-copyable-address-at-the-top-is-the-contract-address/31969/2 "2026-11-15T21:59:46Z")

</div>

The **Receive** option is already available on the home screen. You don’t need to open a specific token’s detail page to receive it. Simply go to the home screen, select **Receive** , and copy your wallet address or share the QR code.

Also, please note that your wallet address is the same across all EVM-compatible networks. You can use the same address to receive tokens on different EVM networks. Just make sure the sender selects the correct network.

> **[Understanding the Ethereum address format and why it matters | MetaMask Help...](https://support.metamask.io/more-web3/learn/the-ethereum-address-format-and-why-it-matters-when-using-metamask/)**
>
> Learn how Ethereum and EVM-compatible addresses work (starting with “0x”), why using the right format matters in MetaMask, and how to avoid sending funds to the wrong network..

 ![IMG_0832](https://europe1.discourse-cdn.com/metamask/original/3X/e/7/e72f56a5315adefc2d3c6ba742d7a80793802edb.jpeg)

---

<div class="post-metadata">

**Author:** ![bvccpa01](https://dub1.discourse-cdn.com/metamask/user_avatar/community.metamask.com/bvccpa01/32/40116_2.png) [@bvccpa01](https://community.metamask.com/u/bvccpa01)\
**Post date:** [November 15, 2026, 10:17pm UTC](https://community.metamask.com/t/add-a-receive-button-to-the-token-detail-page-and-make-it-clear-that-the-copyable-address-at-the-top-is-the-contract-address/31969/3 "2026-11-15T22:17:46Z")

</div>

Thanks, I know Receive is on the home screen. But the token page already has Buy, Send and Swap, so I don’t see a reason to leave out Receive.

There’s also a safety risk. The only address you can copy at the top of the token page is the token’s **contract address** , and it isn’t labeled as one. A beginner looking for “the address” there could copy it and share it as their deposit address, and funds sent there would be lost.

My suggestion:

1. Add a **Receive** button to the token page.
2. Remove the copy option for the contract address at the top. You can already copy it in the Token details section further down, so the top one adds nothing and only causes confusion. If it stays, label it **“Token contract address.”**

---

<div class="post-metadata">

**Author:** ![Oxsoltani](https://dub1.discourse-cdn.com/metamask/user_avatar/community.metamask.com/oxsoltani/32/37719_2.png) [@Oxsoltani](https://community.metamask.com/u/Oxsoltani)\
**Post date:** [November 15, 2026, 10:21pm UTC](https://community.metamask.com/t/add-a-receive-button-to-the-token-detail-page-and-make-it-clear-that-the-copyable-address-at-the-top-is-the-contract-address/31969/4 "2026-11-15T22:21:20Z")

</div>

Yes of course! Thank you so much for your feedback. I’ll definitely share this with the team. 🙂

---

<div class="post-metadata">

**Author:** ![Darkec](https://dub1.discourse-cdn.com/metamask/user_avatar/community.metamask.com/darkec/32/39696_2.png) [@Darkec](https://community.metamask.com/u/Darkec)\
**Post date:** [November 18, 2026, 3:16pm UTC](https://community.metamask.com/t/add-a-receive-button-to-the-token-detail-page-and-make-it-clear-that-the-copyable-address-at-the-top-is-the-contract-address/31969/5 "2026-11-18T15:16:14Z")

</div>

just a small update regarding your point 3..in the upcoming MetaMask Extension v13.58.0, copying a tokens contract address will display “Token contract address copied”..it’s not the exact warning you suggested, but it’ll make it clearer what address was copied..

> <https://github.com/MetaMask/metamask-extension/pull/47656>
>
> \## \*\*Description\*\*
> 
> On the token details page, the contract address in the hea…der copies on click, but the only feedback is a color and icon change on the address. This changes the feedback to match the inline copy treatment in the home address list: while the copied state is active, the address text is replaced with "Token contract address copied" and the icon switches to a success check.
> 
> The copied state uses the existing \`useCopyToClipboard\` hook, so it resets after its standard delay (2 seconds). The home address list resets after 1 second, so the timing is not identical.
> 
> The copy text is a new \`tokenContractAddressCopied\` key, added to both \`en\` and \`en\_GB\` (the locale verifier requires them to match).
> 
> Note: this is a draft. Screenshots are not captured yet.
> 
> \## \*\*Changelog\*\*
> 
> CHANGELOG entry: Updated the token contract address copy confirmation on the token details page to read "Token contract address copied"
> 
> \## \*\*Related issues\*\*
> 
> Refs: N/A (no ticket linked yet)
> 
> \## \*\*Manual testing steps\*\*
> 
> 1. Run the extension (\`yarn start\`) and unlock the wallet.
> 2. Go to the asset list and open a non-native token on a network where it has a contract address (for example USDC on Arbitrum One).
> 3. Click the contract address shown under the token name in the header.
> 4. Verify the address text is replaced with "Token contract address copied" and the icon becomes a green check.
> 5. Wait about 2 seconds and verify the compact contract address returns.
> 6. Paste somewhere and verify the full contract address was copied.
> 7. Open a token with a long ticker and repeat step 3. Verify the copied message truncates with an ellipsis and does not push the ticker off the header.
> 
> \## \*\*Screenshots/Recordings\*\*
> 
> \### \*\*Before\*\*
> 
> no success message after copying
> 
> \### \*\*After\*\*
> 
> https://github.com/user-attachments/assets/fc56b60d-bf2f-4c00-9755-f8622569dbf9
> 
> 
> \## \*\*Pre-merge author checklist\*\*
> 
> 
> \- \[\] I've followed \[MetaMask Contributor Docs\](https://github.com/MetaMask/contributor-docs) and \[MetaMask Extension Coding Standards\](https://github.com/MetaMask/metamask-extension/blob/main/.github/guidelines/CODING\_GUIDELINES.md).
> \- \[\] I've completed the PR template to the best of my ability
> \- \[x\] I've included tests if applicable
> \- \[\] I've documented my code using \[JSDoc\](https://jsdoc.app/) format if applicable
> \- \[\] I've applied the right labels on the PR (see \[labeling guidelines\](https://github.com/MetaMask/metamask-extension/blob/main/.github/guidelines/LABELING\_GUIDELINES.md)). Not required for external contributors.
> 
> \## \*\*Pre-merge reviewer checklist\*\*
> 
> \- \[\] I've manually tested the PR (e.g. pull and build branch, run the app, test code being changed).
> \- \[\] I confirm that this PR addresses all acceptance criteria described in the ticket it closes and includes the necessary testing evidence such as recordings and or screenshots.
> 
> Made with \[Cursor\](https://cursor.com)
> 
> 
> \---
> 
> \> \[!NOTE\]
> \> \*\*Low Risk\*\*
> \> Localized UI and copy-feedback only; no changes to wallet logic, networking, or secrets handling.
> \> 
> \> \<sup\>Reviewed by \[Cursor Bugbot\](https://cursor.com/bugbot) for commit 2112307767cfc85004f3b9326b0c529013cad761. Bugbot is set up for automated code reviews on this repo. Configure \[here\](https://www.cursor.com/dashboard/bugbot).\</sup\>
